HPS - Modular Home Building Foundations

Commercial

Residential	Modular Homes

Modular / Manufactured Homes

Utilizing the modular home plans and the developer plans, helical piers are installed throughout the area to extact locations specified through surveying. The piers are cut to elevation and ready to for the modular structure to be placed on top.

Manufactured Homes can immediately be set on top of the helical pier foundations

Here, helicals are installed to elevation one by one. As the installer embeds another lead section workers quickly add extensions. The installer is required to embed the helical piers to a pre-determined torque-on-install. Extensions may be continually added until the desired torque is met.

skirting is added to protect the helical piers from the elements

Some areas require the piers to be embedded in excess of 70 feet, where other areas piers simply are installed below the frost line.

screw piles can be used as foundation supports for decks and ramps

Modular homes are place on top of and fastened to the piers. Once the plumbing and electrical are completed the decking and skirting finishes off the base of the home.

screw piles can be used as foundation supports for decks and ramps

Modular Home Foundations

Piers are placed as to the design of the modular home.
Piers are cut to elevation
Home is placed on top of piers
Plumbing and electrical in concluded
Skirting and decking is installed
Economical and cost-effective foundation
Project completetion time exceeds expectations

Benefits of Screw Piles:

Fast installation
Can be installed in all types if weather
Removable, reusable
No pre-excavation, spoils, or tailings results in less time onsite
Cost Effective
Strength testing is immediate
Speeds excavation and construction

Residential

Modular Homes